Gefunden bei Linux und ich
$ inxi -F
System: Host: c2012 Kernel: 3.13.0-32-generic x86_64 (64 bit) Desktop: KDE 4.13.2 Distro: Ubuntu 14.04 trusty
Machine: Mobo: Gigabyte model: Z68XP-UD3 version: x.x Bios: Award version: F9 date: 02/21/2012
CPU: Quad core Intel Core i7-2600 CPU (-HT-MCP-) cache: 8192 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx)
Clock Speeds: 1: 1600.00 MHz 2: 1600.00 MHz 3: 1600.00 MHz 4: 1600.00 MHz 5: 1600.00 MHz 6: 1600.00 MHz 7: 1600.00 MHz 8: 1600.00 MHz
Graphics: Card: NVIDIA GF119 [GeForce GT 520]
X.Org: 1.15.1 drivers: nvidia (unloaded: fbdev,vesa) Resolution: 1920x1200@60.0hz
GLX Renderer: GeForce GT 520/PCIe/SSE2 GLX Version: 4.4.0 NVIDIA 331.38
Audio: Card-1: NVIDIA GF119 HDMI Audio Controller driver: snd_hda_intel Sound: ALSA ver: k3.13.0-32-generic
Card-2: Intel 6 Series/C200 Series Family High Definition Audio Controller driver: snd_hda_intel
Network: Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169
IF: eth0 state: up speed: 100 Mbps duplex: full mac: 50:e5:49:c5:bd:2e
Drives: HDD Total Size: 2128.4GB (52.1% used) 1: id: /dev/sda model: SAMSUNG_SSD_830 size: 128.0GB
2: id: /dev/sdb model: WDC_WD20EARS size: 2000.4GB
Partition: ID: / size: 37G used: 7.3G (21%) fs: ext4 ID: /home size: 55G used: 29G (55%) fs: ext4
ID: /tmp size: 20G used: 60M (1%) fs: ext4 ID: /var size: 39G used: 2.8G (8%) fs: ext4
ID: swap-1 size: 41.94GB used: 0.00GB (0%) fs: swap
RAID: No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Sensors: System Temperatures: cpu: 35.0C mobo: N/A gpu: 41C
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 260 Uptime: 8:38 Memory: 2354.1/16032.2MB Client: Shell (bash) inxi: 1.9.17
Tags: Linux-Hardware
Treiber für Drucker Minolta Magicolor 2300W
$ lsusb
Bus 005 Device 003: ID 0686:3009 Minolta Co., Ltd Magicolor 2300W
$ sudo apt-get install printer-driver-m2300W
Systemeinstellungen - Drucker - Drucker hinzufügen - Druckertreiber auswählen
Konica Minolta Magicolor 2300W foomatic m2300w
oder auch hier nachsehen:
http://sourceforge.net/projects/m2300w/
$ sudo apt-get install build-essential
$ tar zxvf m2300w-0.51.tar.gz
$ cd m2300w-051
$ ./configure
$ make
$ sudo make install
Tags: Linux-Hardware
Treiber für integrierte Webcam
$ lsusb
Bus 001 Device 003: ID 05ca:1839 Ricoh Co., Ltd Visual Communication Camera VGP-VCC6 [R5U870]
Dann weiter, wie hier beschrieben:
https://launchpad.net/~r5u87x-loader/+archive/ppa
Tags: Linux-Hardware128 GiB SSD
2 TB HD
Intel i7-2600
$ lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 8
On-line CPU(s) list: 0-7
Thread(s) per core: 2
Core(s) per socket: 4
CPU socket(s): 1
NUMA node(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 42
Stepping: 7
CPU MHz: 1600.000
BogoMIPS: 6819.89
Virtualization: VT-x
L1d cache: 32K
L1i cache: 32K
L2 cache: 256K
L3 cache: 8192K
NUMA node0 CPU(s): 0-7
$ lspci
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5)
00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5)
00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5)
00:1c.6 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 (rev b5)
00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5)
00:1d.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation Z68 Express Chipset Family LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
01:00.0 VGA compatible controller: nVidia Corporation GT520 [GeForce GT520] (rev a1)
01:00.1 Audio device: nVidia Corporation HDMI Audio stub (rev a1)
03:00.0 PCI bridge: Integrated Technology Express, Inc. Device 8892 (rev 30)
04:02.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0)
05:00.0 USB Controller: Etron Technology, Inc. EJ168 USB 3.0 Host Controller (rev 01)
06:00.0 USB Controller: Etron Technology, Inc. EJ168 USB 3.0 Host Controller (rev 01)
07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
08:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller (rev 11)
Tags: Linux-Hardware c2012
Literatur
Vorraussetzung der Zugriff über ssh und Passwort funktioniert bereits.
Auf meinem Rechner den Public Key erstellen:
$ ssh-keygen -t rsa
den Public Key für rootauf WD My Book Live übertragen:
$ ssh-copy-id -i ~/.ssh/id_rsa.pub root@mybooklive.local
root@mybooklive.local's password: welc0me
Now try logging into the machine, with "ssh 'root@mybooklive.local'", and check in:
~/.ssh/authorized_keys
to make sure we haven't added extra keys that you weren't expecting.
und siehe da man kann sich ohne Passwort als root auf dem WD My Book Live anmelden:
$ ssh root@mybooklive.local
Damit ich nicht als root auf das Gerät zugreifen muss, erlaube ich dem Standard-Nutzer admin auch den Zugriff über ssh.
Dazu muss der Public Key auch dem Nutzer admin zugeordnet werden. Dazu werden die Dateien des Verzeichnisse /root.ssh in das Verzeichnis /share/.ssh kopiert
MyBookLive:~# mkdir /shares/.ssh
MyBookLive:~# cp ~/.ssh/* /shares/.ssh/.
MyBookLive:~# ls -l /shares/.ssh/
total 128
-rw------- 1 root root 391 2012-03-01 11:31 authorized_keys
-rw-r--r-- 1 root root 442 2012-03-01 11:31 known_hosts
MyBookLive:~# chmod +r /shares/.ssh/authorized_keys
MyBookLive:~# ls -l /shares/.ssh/
total 128
-rw-r--r-- 1 root root 391 2012-03-01 11:31 authorized_keys
-rw-r--r-- 1 root root 442 2012-03-01 11:31 known_hosts
MyBookLive:~# exit
und siehe da man kann sich ohne Passwort als admin auf dem WD My Book Live anmelden:
$ ssh admin@mybooklive.local
Linux MyBookLive 2.6.32.11-svn21605 #1 Fri Oct 15 17:13:23 PDT 2010 ppc
Last login: Thu Mar 1 13:09:26 2012 from 192.168.1.8
admin@MyBookLive:~$
Tags: Linux-Hardware MyBookLive ssh
Um den ssh Zugriff zu ermöglichen kann man diese Hinweise befolgen:
Einloggen unter:
http://mybooklive.local/UI/login
Dann auf die ssh-Seite wechseln:
http://mybooklive.local/UI/ssh
Um den ssh Zugriff zu ermöglichen kann man diese Hinweise befolgen:
http://community.wdc.com/t5/My-Book-Live/Telnet-or-ssh-my-book-live/td-p/87065
Konfigurationsdatei über mybooklive.local herunterladen
Die heruntergeladene Datei bearbeiten
ssh_enable="disabled"
ändern in
ssh_enable="enabled"
und wieder hochladen. Danach führt MyBookLive einen Neustart aus.
Jetzt ist ein Zugriff als root über ssh möglich:
$ ssh root@mybooklive.local
root@mybooklive.local's password: welc0me
MyBookLive:~# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/md1 1,9G 887M 939M 49% /
tmpfs 50M 0 50M 0% /lib/init/rw
udev 10M 6,5M 3,5M 65% /dev
tmpfs 50M 0 50M 0% /dev/shm
tmpfs 50M 2,5M 48M 5% /tmp
ramlog-tmpfs 20M 2,2M 18M 11% /var/log
/dev/sda4 1,9T 260G 1,6T 15% /DataVolume
MyBookLive:~#
Damit ich nicht als root auf das Gerät zugreifen muss, erlaube ich dem Standard-Nutzer admin auch den Zugriff über ssh.
Dazu wird mit dem Editor nano die Datei /etc/ssh/sshd_config bearbeitet. (Bitte beachten: es gibt auch eine Datei “/etc/ssh/ssh_config”. Diese ist hier nicht gemeint.)
MyBookLive:~#nano /etc/ssh/sshd_config
Die Zeile
AllowUsers root
erweitern auf
AllowUsers root admin
und den ssh-Server anweisen die Konfiguration neu zu lesen:
MyBookLive:~#/etc/init.d/ssh reload
$ ssh admin@mybooklive.local
admin@mybooklive.local's password:
Linux MyBookLive 2.6.32.11-svn21605 #1 Fri Oct 15 17:13:23 PDT 2010 ppc
Last login: Thu Mar 1 12:59:41 2012 from 192.168.1.8
admin@MyBookLive:~$ df -h
Filesystem Size Used Avail Use% Mounted on
/dev/md1 1,9G 887M 939M 49% /
tmpfs 50M 0 50M 0% /lib/init/rw
udev 10M 6,5M 3,5M 65% /dev
tmpfs 50M 0 50M 0% /dev/shm
tmpfs 50M 2,5M 48M 5% /tmp
ramlog-tmpfs 20M 2,3M 18M 12% /var/log
/dev/sda4 1,9T 150G 1,7T 9% /DataVolume
admin@MyBookLive:~$ pwd
/shares
admin@MyBookLive:~$
Tags: Linux-Hardware MyBookLive ssh